1: First day working on my project, I ran into problems. First I had to freeze my glass jar in order to make the design on the lid. So I put the glass in the freezer on Monday (4/18). I totally forgot about the jar and on Wednesday I remember it was on the freezer, but it was too late, it was all broken. The picture shown below is when I took it out the freezer.
2: I brought another glass jar and did the first step again, but this time without forgetting that I had it in the freezer. I chose to do a flower design on the lid. Once I had the design, I used engineering paper to copy the design to tape to the lid, so I can start hammering the wholes using a nail. Shown below is the online design and the copied design. Some parts of the lid was harder then others because of the ice, so the only problem I had when hammering is that two nails bent. I was left to use the short nail and kept on hammering my fingers.
3: Here is the final result of the lid when I was finished. Some of the wholes are off, because the paper was really wet and ripping.
